Start Delay; Channel Display; Ambient Temperature / Rh - Extech Instruments VPC260 User Manual

5
Test Settings Menu

5.2.2 Start Delay

Add a delay (from 3 to 100 seconds) to the start of the tests.
1. Scroll to the Start Delay selection in the menu.
2. Press ENTER to open the selection.
3. Press ENTER again to prepare the setting for editing.
4. Use the arrows to set the delay time from 3 to 100 seconds. Note that the
numbers wrap, so you can scroll down from '3' to '100' seconds, for
example.
5. Tests will not start until this delay time has elapsed (the LCD will show
WAIT during the delay).
6. Press ESC to save the setting.

5.2.3 Channel Display

Choose the channels to include on the measurement screen.
1. Scroll to the Channel Display selection in the menu.
2. Press ENTER to open the selection.
3. Use the arrow buttons to scroll to a channel.
4. Use the ENTER button to enable or disable the channel. The channel is
disabled when the selection circle is black. Disabled channels will not ap-
pear on the measurement screen.
5. Press ESC to save the setting.

5.2.4 Ambient Temperature / RH%

Show or hide the ambient readings on the measurement screen.
#NAS100084; r. AA/93064/93076; en-GB
11