Installing The Power Supply - Dell PowerEdge 860 Hardware Owner's Manual

Figure 3-13. Installing and Removing the Power Supply
2
1
7
1 screw
4 power supply
7 P3 connector

Installing the Power Supply

1 Lower the power supply into the chassis and slide it backward until the four pins on the power supply
are engaged into the securing brackets.
2 Using a #2 Phillips screwdriver, install the screw at the front of the power supply that secures the
power supply to the chassis.
62
Installing System Components
3
2 P1 connector
5 pins (4)
4
5
6
3 P2 connector
6 securing brackets (4)