Protocol Based Activity Screen - biodex SYSTEM 4 Instructions For Use Manual

Protocol Based Activity Screen

Once the ROM has been defined and the Next icon is selected, the Protocol Based Activity
screen displays. Depending on the settings chosen for Practice (from Utilities on the Home
Screen), either a Practice Trial button will appear or a mandatory Practice Trial will be included
at the beginning of the activity before each set.
1. Select the Start icon when ready to begin your activity. Complete the practice trial reps if
they are included, then hold the attachment at the maximum Towards limit until the "3,
2, 1...GO!" pop-up message is displayed to begin the activity.
NOTE: Data collection does not start until after "GO!"
NOTE: The "3, 2, 1...GO!" pop-up message displays for all modes except Isometric.
2. The patient makes a series of Toward and Away motions as instructed by the clinician.
3. The Torque, Position, and Velocity will display in different colors on the graph. The Peak
Torque, Total Work, and % CV will all be recorded on the left. Values will also display in
Current Position and Total ROM. Protocol Progress will display on the right.
42