- Take the air clean filter out of the polyethylene bag and
attach it to the back filter.
- Set the air clean filter to the back cover, fitting it into the
four catches in the cover.
- Place the holder into the four catches in the cover, with
the convex portions upward.
- Press the perimeter of the holder with your fingers to
secure it.
- Check the condition to ensure it is properly set.
- If not set correctly, the back cover cannot be attached to
the unit.
Your dehumidifier will not operate if the tank is full of water
or not set correctly.
Removing the water tank:
Draw the water tank gently toward you by holding the
concave part of the tank.
Setting the water tank
Push the tank horizontally and gently. The handle will lie
down by itself.
Active carbon
filter holder
Active carbon filter
10
Need help?
Do you have a question about the 821-041V70 and is the answer not in the manual?
Questions and answers