Dell Badge - Dell OptiPlex 755 User Manual

4 Connect the AC power cable to the power outlet.
The AC power adapter has a status light that is off when the adapter is not plugged into the power
outlet, and it is green or amber for the following different states:
• green light — solid green indicates that the power adapter is connected to an AC power outlet and
to the computer.
• amber light — solid amber indicates that the power adapter is connected to an AC power outlet
but not to the computer. The computer will not operate in this condition. Connect the AC power
adapter to the computer and/or reset the power adapter by disconnecting and reconnecting the
plug to the power outlet.

Dell Badge

CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Information Guide
.
The Dell badge on the front of your computer can be rotated. To rotate the badge:
1 Remove the computer cover (see "Removing the Computer Cover" on page 232).
2 Pull on the lever to release the tab from the slot.
3 Rotate the badge to the desired position, ensuring that the tab is secured in the slot.
2
1 grounding source (screw)
2
metal ground connector
1
Ultra Small Form Factor Computer
Product
239