Floppy Drive - Dell OptiPlex 755 User Manual

1
data cable
9 Replace the computer cover (see "Replacing the Computer Cover" on page 317).
10 Enter system setup (see "System Setup" on page 280), and update the SATA port option under the
Drives option list.
11 Exit system setup, and reboot the computer.
12 Partition and logically format your drive.
See the documentation for your operating system for instructions.
13 Test the hard drive by running the Dell Diagnostics (see
14 If the drive you just installed is the primary drive, install your operating system on the hard drive.

Floppy Drive

CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the
Product Information Guide
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before
removing the computer cover.
1
2
hard drive system board
connector
.
2
3
power cable
" on page 353).
"Dell Diagnostics
3
63
Drives