Floor Stand; Figure 5-1. Floor Stand Removal - Dell OptiPlex GXi Service Manual

F
loor Stand

Figure 5-1. Floor Stand Removal

To remove the floor stand, follow these steps:
1. Place the right side of the computer on a flat work surface.
2. Unscrew the floor stand screw.
Use your fingers or a wide flat-blade screwdriver to unscrew the floor stand
screw.
3. Pull the floor stand away from the computer.
Disengage the three orientation nubs that position and help hold the floor
stand to the computer.
floor stand screw
Removing and Replacing Parts on the Midsize Chassis 5-3