Built-In Nic; Floor Stand - Dell OptiPlex Gs Service Manual

Built-In NIC

®
The Gs+ systems have a built-in integrated 3Com 3C915 Ethernet NIC sub-
system. The NIC subsystem connects to an RJ45 connector on the back panel of
the computer.
Chapter 4, "Using the Network Interface Controller," in the Reference and
Installation Guide provides instructions for connecting the computer to, and
configuring it for use on, an Ethernet network.

Floor Stand

The computers can be used as either a desktop (horizontal) or a mini tower (ver-
tical) computer. The floor stand is optional on the low-profile computers and is
included with the midsize computers. The floor stand can be attached to the left
side of the computer to orient it as a mini tower computer.
1-8 Dell OptiPlex Gs and Gs+ Systems Service Manual