Riser Board; Figure 6-18. Riser Board Removal - Dell OptiPlex GXi Service Manual

Riser Board

riser-board
mounting screws (2)
slots (2)
expansion-card cage

Figure 6-18. Riser Board Removal

To remove the riser board, follow these steps:
1. Remove the expansion-card cage and all expansion cards.
2. Place the expansion-card cage on a flat work surface with the riser
board facing up.
3. Remove the riser-board mounting screws.
4. Slide the riser board away from the release handle until it stops; then
lift the riser board away from the expansion-card cage.
riser board
Removing and Replacing Parts on the Mini Tower Chassis 6-19