Control Panel; Figure 5-5. Control-Panel Removal - Dell OptiPlex GXi Service Manual

C
ontrol Panel

Figure 5-5. Control-Panel Removal

To remove the control panel, follow these steps:
1. Remove the hard-disk drive bracket.
2. Disconnect the control-panel cable from the PANEL connector on the
system board (see Figure 5-13).
3. Remove the mounting screw holding the control panel to the chassis.
4. Slide the control panel out of the hooks holding it to the chassis.
Note the routing of the control-panel cable as you remove it from the
chassis.
chassis hooks (2)

control panel

screw
control-panel
cable
Removing and Replacing Parts on the Midsize Chassis 5-7