Using The Power Switch; Using The Optional Floor Stand; Figure 1-1. Dell Inspector Program - Dell OptiPlex Gn Reference And Installation Manual

Figure 1-1. Dell Inspector Program

If you ordered Dell-installed software with your system,
®
such as MS-DOS , Microsoft Windows, or other pro-
grams, Dell provides a menu that allows you to make
program diskette sets of your Dell-installed software. A
program diskette set is an uninstalled version of a soft-
ware package that you can use to reinstall or reconfigure
the software. You can use this same menu to remove
diskette image files (individual files that correspond to
each diskette in a program diskette set) to reclaim space
on the computer's hard-disk drive. For more information
on making program diskette sets, see the online help pro-
vided in the Dell Program Diskette Maker, which is
available in the Dell Accessories program group or
folder.
1-4 Dell OptiPlex Gn and Gn+ Low-Profile Systems Reference and Installation Guide
U
sing the Power Switch
If the system does not turn off when the power switch is
pressed, the system may be hung. Press and hold the
power switch until the system turns off completely (this
may take several seconds). Alternatively, press the reset
button to turn the system off when it is hung.
U
sing the Optional Floor Stand
An optional floor stand is available for your system that
you can attach to the computer to give it a mini tower
(vertical) orientation. Although you can attach (and
remove) the floor stand at any time with a minimum of
system disruption, it is easiest to attach before you set up
your computer and connect the back panel cables.