Operation - Haier AS25S2SJ1FA-3 Operation Manual

Opertion
AUTO,COOL,HEAT,DRY,FAN

Operation

MODE I FEEL
SLEEP
EXTRA
FUNCTION
ECOSENSOR
TIME TIME CONFIRM
ON
OFF
CANCEL
LOCK LIGHT RESET
the mode setting in sequence.
AUTO
1.
Unit start
2.
Press MODE button and
select an operation mode.
MODE
COOL HEAT
FAN DRY
Mode
In AUTO mode, the air conditioner will automatically
select Cool or Heat operation according to room
AUTO temperature. When FAN is set to AUTO, the air con-
ditioner automatically adjusts the fan speed accord-
ing to room temperature.
COOL Cooling only
In DRY mode , when room temperature becomes
DRY lower than temp.setting+2
mittently at LOW speed regardless of FAN setting.
In HEAT mode, warm air will blow out after a short
period of the time due to cold-draft prevention func-
HEAT tion. When FAN is set to AUTO,the air conditioner
automatically adjusts the fan speed according to
room temperature.
In FAN mode , the unit will not operate in
COOL or HEAT mode but only in FAN mode,
FAN AUTO is not available in FAN mode. And
temp. setting is disabled. In FAN mode, Sleep
operation is not available.
MODE I FEEL
SLEEP
EXTRA
FUNCTION
ECOSENSOR
TIME TIME CONFIRM
ON
OFF CANCEL
LOCK LIGHT RESET
AUTO
LOW
3
Note
, the unit will run inter-
3.
Press TEMP button
Every time the button
is pressed, temp. setting increases
1 °C.
Every time the button
is pressed, temp. setting decreases
1 °C.
Unit will start running to reach the
temp. setting on LCD.
4.
FAN SPEED
Press FAN SPEED button. For each
press, fan speed changes as fol-
lows:
Unit will run at selected fan speed.
MID HI