Haier AS25S2SJ1FA-3 Operation Manual page 7

Opertion
In the
thermoregulation range is 16°C-30°C.
When the fan speed is displayed as
automatic (default initial state), it is
smart humidity mode and the air conditioner
regulates automatically and controls the
relative humidity of the indoor environment
MODE I FEEL
wi within 40%-55%. If you manually adjust the
SLEEP
fan speed to high/medium/low position,
then the AC enters ordinary drying.
If the fan speed is set to automatic,then
the machine enters smart humidity
mode again.
EXTRA
ECOSENSOR FUNCTION
CONFIRM
TIME TIME
ON OFF
CANCEL
LOCK LIGHT RESET
If you press the button of query, the LCD display will show
the temperature of the indoor environment.
If you press the button twice continuously, the LCD display
will show the humidity value of the indoor air;
If you press the button three times continuously, the LCD
display will show the PM2.5 concentration of the indoor air.
Note: Time intervals of continuous button pressing shall be
less than 5s.
Operation
Press SMART HUMIDITY
button
mode, the
SMART Humidity
AIR STATUS function
I FEEL Operation
MODE I FEEL
SLEEP
EXTRA
ECOSENSOR FUNCTION
CONFIRM
TIME TIME
ON OFF
CANCEL
LOCK LIGHT RESET
4
Press I FEEL button
1. Only for COOLING, HEATING or
implemented).
2. Place the remote controller within
the acceptable range of air condi-
tioner. Press the " " button,the
remote control displays the "
The remote controller sends the circu-
lation temperature date to the indoor
unit every 3 minutes, and the air con-
ditioner runs according to this data.
3. Exit "I FEEL " mode when power off
press the " " button or switch
other modes.
" icon.