Hub To Switch; 10Base-T Hub - TRENDnet TE100-S55E User Manual

1. The 100LINK/ACT,10LINK/ACT
indicator light green for hookup to 100Mbps
speed or light amber for hookup to 10Mbps
speed.
2. The FDX 10/100,COL 10/100 LED indicator
depends upon LAN card capabilities for full-
duplex or half-duplex.

Hub to Switch

A hub (10 or 100BASE-TX) can be connected to the
Switch via a two-pair Category 3, 4, 5 UTP/STP
straight cable. The connection is accomplished from
the hub uplink (MDI-II) port to any of the Switch
(MDI-X) ports: 1x - 5x for the 5-port 10/100 Fast
Ethernet Switch or 1x - 8x for the 8-port 10/100 Fast
Ethernet Switch.
A. 10BASE-T Hub
For a 10BASE-T hub, the Switch LED indicators
should light up as the following:
1. FDX 10/100, COL 10/100 LED indicator is
OFF.
2. 100LINK/ACT, 10LINK/ACT LED indicator is
light amber.
14
LED