ADJ MEGA TRIPAR PROFILE PLUS User Manual page 10

Sound Active Mode:
In this mode the unit will react to sound, and chase through the different colors.
1. Plug the fixture in and press the MODE button until "SoXX" is displayed. "XX" represents the
sound active mode (1-16) that is currently selected.
2. The fixture will now change via sound.
3. Press the SET UP button to adjust the sound sensitivity. "SJ-X" should be displayed. Use the UP
or DOWN buttons to adjust the sensitivity. "SJ-1" is the lowest sensitivity, "SJ-8" is the highest.
Auto Run Mode:
There are 3 Auto Run Modes to choose from: Color Fade, Color Change, and both modes running
together. The running speed is adjustable in all 3 modes.
1. Plug the fixture in and press the MODE button until either "AFXX", "AJXX", or "A-JF" is displayed.
Use the SETUP button to scroll through the 3 different Auto Run modes.
• AFXX = Color Fade mode - There are 16 Color Fade modes to choose from. Use the UP or
DOWN buttons to scroll through the different Color Fade modes.
• AJXX = Color Change mode - There are 16 Color Change modes to choose from. Use the UP
or DOWN buttons to scroll through the different Color Change modes.
• A-JF = Both Color Fade and Color Change modes running.
2. After you have chosen your desired running modes, press the SETUP button until "SP.XX" is dis-
played. When this is displayed you can adjust the running speed of your desired program. Use
the UP or DOWN button to adjust the speed between "SP.01" (slow-est) and "SP.16" (fastest).
Once you have set your desired running speed, press the SET UP button to return to your desired
Auto Run Mode.
Static Color Mode:
1. Plug the fixture in and press the MODE button until "CLXX" is displayed.
2. There are 64 colors to choose from. Select your desired color by pressing the UP and DOWN
buttons. After you have selected your desired color, you can activate and adjust strobing by
pressing the SET UP button to enter the Flash (strobe) mode.
3. "FS.XX" will be displayed, indicating that the unit is in Flash mode. The Flash can be adjusted
between "FS.00" (flash off) to "FS.15" (fastest flash).
DMX Mode:
Operating through a DMX controller gives the user the freedom to create programs tailored to his or
her own individual needs. This function also allows the fixtures to be used as spot lights. The Mega
TRIPAR Profile Plus has 5 DMX modes: 4 channel mode, 5 channel mode, 6 channel mode, 9 chan-
nel mode, and a 10 channel mode. See the DMX Traits section of this manual for details.
1. This function will allow you to control each individual fixture's traits with a standard DMX 512
controller.
2. To run your fixture in DMX mode press the MODE button until "d.XXX" is displayed. "XXX" repre-
sents the currently selected DMX address. Use the UP or DOWN buttons to select your desired
DMX address, then press the SETUP button to select your DMX Channel mode.
3. Use the UP or DOWN buttons to scroll through the DMX Channel modes. The Channel mode
options are 4-channel, 5-channel, 6-channel, 9-channel, or 10-channel.
4. After you have chosen your desired DMX Channel mode, connect the fixture to any standard
DMX controller via the XLR connections.
OPERATING INSTRUCTIONS
10