Shutting Down - RoboLabs ROBOJETFLOSS ACB-09-120 Operating Manual

tm2620/tm2627 Apr-20
cotton candy. The most common technique is forcing the candy sleeve to follow
you several feet away from the machine like a "snake" or animated rope.
The "snake" trick requires plenty of space, and note that if there is wind present
you will have to have the floss follow you down-wind.
Once you have made a small cloud on the stick, pull it smoothly away from the
machine (see the figure below). Keep winding the cotton candy, and do not let it to
fall below the floss pan. Be careful, as winding too rapidly might break the sleeve.
By moving move your hands up and down and changing the angle of the stick,
you will find that you can modify the shape of the snake.
Once you have the hang of it, you will be able to step away from the machine, as
far as 3 to 5 m (10' to 15', depending on conditions) and the snake will follow you
if you continue the proper winding rate.
You can find more information at www.flyingcottoncandy.com

Shutting down

When shutting down for periods of less than 24 hours, you may leave any
remaining flossugar in the spinning head.
Turn off power to the heating element switch (12) and capture the remaining
14