Configuring Traffic Load Balancing - Ruijie Reyee RG-RAP Series Configuration Manual

Configuration Guide
Table 3-4 Client Load Balancing Configuration Parameters
Parameter
Group Name
Type
Rule
Members
3.24.3

Configuring Traffic Load Balancing

Choose Network-Wide
Click Add. In the dialog box that appears, set Type to Traffic Load Balancing, and configure Group Name,
Members, and Rule.
Description
Enter the name of the AP load balancing group.
Select Client Load Balancing.
Configure a detailed load balancing rule, including the maximum number of
clients allowed to associate with an AP, the difference between the currently
associated client count and client count on the AP with the lightest load, and
the number of attempts to the AP with full load.
By default, when an AP is associated with 3 clients and the difference between
the currently associated client count and client count on the AP with the lightest
load reaches 3, clients can associate only to another AP in the group. After a
client association is denied by an AP for 10 times, the client will be allowed to
associate to the AP upon the next attempt.
Specify the APs to be added to the AP load balancing group.
> Workspace > Wireless > Load Balancing.
64
Wi-Fi Network Settings