RH Baby&child CAMP INDOOR PLAYHOUSE SMALL Assembly Instructions

PARTS INCLUDED
TENT COVER
(A) 38" Metal Poles ( 5pcs.)
(B) 28" Metal Poles ( 2 pcs.)
(C) 24 1/2" Metal Poles ( 4pcs.)
(D) 18 1/4" metal Poles (4pcs.)
90° Right-Angle Connector (6pcs.)
135° Angle Connectors (4 pcs.)
ASSEMBLY INSTRUCTIONS
1. Locate a level surface, and begin building the framework from bottom up with metal poles and connectors as
shown.
2. Place tent cover over frame.
CARE INSTRUCTIONS
1. Machine wash cold on gentle cycle.
2. Do not use bleach.
3. Tumble dry low.
4. Warm iron if needed.
IMPORTANT SAFETY INSTRUCTIONS
1. Two adults are recommended for assembly.
2. For children ages 3+.
CAMP INDOOR PLAYHOUSE SMALL - ASSEMBLY INSTRUCTIONS