RH Baby&child CLASSIC CHANGING TABLE TOPPER Assembly Instructions

C L A S S I C C H A N G I N G TA B L E TO P P E R

WARNING:

FALL HAZARD – To prevent death or serious injury from falls, always keep child within arm's reach.
NEVER LEAVE CHILD UNATTENDED and always use restraining system.
This changing table is intended for use with children weighing up to 50 pounds.
Do not use the changing table if it is damaged or broken.
Customer Service- If you are missing parts or have any questions about this product, please contact us
at : 1-800-762-1751

IMPORTANT SAFETY INSTRUCTIONS:

Please read all instructions before use of the changing table.
For your safety, assembly by two or more adults is recommended.
Keep instructions for future use.

PRE-ASSEMBLY:

• The illustrations provided allow for easier assembly when used in conjunction with the assembly
instructions.
• Remove all parts and hardware from
The shipping box provides
completed to avoid accidentally discarding small parts or hardware.
• Use the parts on the hardware list to identify and separate each of the pieces included prior to starting
assembly.
• Note: DO not fully tighten the screws until all parts are in place. Failure to follow these instructions
may cause the screws to misalign during assembly.
• If using power tools to aid in assembly please use caution. Power tools can damage hardware or split
wood.

PARTS INCLUDED:

A [1] Topper

HARDWARE INCLUDED:

B [8] Wood screw 3.5x15mm
C [2] Metal bracket
ASSEMBLY INSTRUCTIONS:
1. To connect Classic
separately), place (2) Metal Brackets (C) over the pre-drilled holes on back of Topper and secure it to
Dresser with (8) Wood Screws (B).
the box and lay out on a carpeted or scratch-free work surface.
an ideal work surface. Do not dispose of any contents until assembly is
Changing Table Topper (A) to Sutton Dresser or Marlowe Dresser (sold
- Page 1 of 2 -