Laser Product - HikRobot SC1000 Series Quick Start Manual

SC1000 Series Vision Sensor Quick Start Guide

1.4 Laser Product

The device with 0.8 MP complies with IEC60825.1:2014 and GB7247.1:2012, and its laser
safety class belongs to laser 2.
Other parameters regarding the laser information are as follows:
● Wavelength: 650 nm
● Beam Divergence Angle: 14.5° × 14.5°
● Repetitive Frequency: Solid
● Maximum Power: 3.8 mW
Caution
● Do not look directly at the laser beam, and if necessary, adjust the direction of direct eye
gaze or close your eyes for protection.
● Do not use optical instruments (such as telescopes, magnifier) to observe the laser beam.
● Do not place optical instruments (such as mirrors) within the irradiation range of the laser
beam.
● Avoid shining the laser on highly reflective materials. If it is unavoidable, the angle of the
reflective material should be adjusted to prevent damage caused by laser reflection.
● Turn off the laser when the device is not in use.
● Please use this device correctly and safely in accordance with the contents of this manual
and the local standards and laws and regulations. Otherwise the operator may be exposed
to the risk of injury, electric shock, or radiation from the laser.
4