Channel Menu - Brother HL-2600CN Owner's Manual

Brother hl-2600cn: owners guide
Hide thumbs Also See for HL-2600CN:
Table of Contents

Advertisement

Channel Menu

Channel
Figure 17
Figure 17. Channel Menu
Antenna
Select the antenna for the channels you want to edit. You
can select Ant-1 (main) or Ant-2 (Aux).
Prefer Digital
When a memorized channel number is available as both
analog and digital, a check mark in the Prefer Digital box
will allow digital channels to display and analog channels
to be hidden (when using CH
check mark will show both analog and digital choices.
Channel
Channels can be changed in 3 ways:
By pressing ADJUST
By pressing CH
or
memory.
Directly entering the number. With so many current
and potential channels, the number range is greatly
expanded. Channels can be one part, analog or
digital (up to the number 16383) or two part, for digital
channels (these use a separator). For a two part
digital channel, you may press SUB/CANCEL on the
remote to enter a separator after the first, second or
third number, depending on the broadcaster's channel
information.
For digital channels, when the broadcaster has sent a
virtual channel number, the virtual channel number is
shown in the text box and the original digital channel
is shown below on-screen, as a reference.
70
Chapter 5. TV Menu Screen Operations
or
). Removing the
or
to select the channel.
for channels already in
Memory
After the available channels have been memorized with
Memorize Channels on the Setup menu, weaker channels
can be added or unwanted channels can also be deleted.
Press CH
or
on the remote control to see the
channels in memory. Press ADJUST
Added or Deleted for the channel shown in the Channel
number box.
Name
Analog channels shown on Antenna-1 or Antenna-2 can
be named (up to four characters). After you enter a
name, it will appear on the TV screen, next to the channel
number.
1.
Press ADJUST
or
2. Press ENTER to set the letter and move to the
next letter position.
3. Press CANCEL to move back one position.
Digital channels are automatically named if the
broadcaster sends the information.
or
to select
to select each letter.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wd-52627Wd-62627

Table of Contents