Edit NetCommand®: Add Devices, continued
Figure 18. [Device] Learn screen
[Device] Advanced Learn Screen
After learning the basic device keys, the [Device]
Advanced Learn screen allows you to learn any special
keys for your device. Most common IR remote control
signal formats can be learned by NetCommand.
A table of specialized device keys is shown in Appendix
E. You only need to learn the functions your devices
respond to and can ignore the functions that do not apply
to your device.
Figure 19. [Device] Advanced Learn screen
The Name screen allows you to change the default
name for each device to a custom name of up to eight
characters (including a blank space), selecting from
letters, numbers and nine different characters. Press
to select each letter, then press ENTER to
move to the next position. Press CANCEL on the remote
Chapter 3. NetCommand Setup and Editing
to delete the current letter and move back one character
position. When in the first position, the CANCEL button
will return the name to the default name.
Figure 20. Name screen
Connection for [Device] Screen
Select the TV and A/V receiver inputs that the device is
connected to. Connecting only audio to the A/V receiver
is recommended. The A/V receiver may need configuring
for digital audio.
Figure 21. Connection for [Device] screen