Status Indicator - Brother HL-2600CN Owner's Manual

Front Control Panel, continued

Status Indicator

Indicator Color TV Condition
None (indicator Normal TV on or standby condition.
off)
Yellow, steady Room temperature is too high.
Red, either steady TV may require service.
or blinking
Lamp Indicator
Indicator Color TV Condition
None (indicator Normal TV on or standby condition.
off)
Green, rapid TV just powered off and lamp is
blinking cooling.
Yellow, steady Lamp nearing end of useful life.
Yellow, blinking 1. Lamp access door is open or not
2. No lamp installed.
Red, steady Lamp no longer illuminates and has
reached the end of the lamp life.
secure.
Additional Information
Normal operation.
TV will not operate when the ambient room
temperature is too high. Turn off the TV and wait
until the room temperature drops.
Turn off the TV and unplug the set from the AC power
source. Wait one minute and then plug the set back
in.
If the LED is still on, contact your dealer or a
Mitsubishi Authorized Service Center. See www.
mitsubishi-tv.com or call 1-800-332-2119 to receive
Authorized Service Center information.
Additional Information
Normal operation.
Begins to blink 30 seconds after turning off TV.
TV can be turned on before it begins to blink or
after the blinking stops, but not while the indicator
is blinking. Normal operation.
This is a recommendation to have a new lamp
ready before the current lamp stops illuminating.
See Appendix H for ordering information.
TV will not operate until lamp access door
is secure. See Appendix H for installation
information.
TV will not operate without a lamp. See Appendix
H for installation information.
Replace the lamp. The TV will not operate when
the lamp no longer illuminates. See Appendix H
for installation information.
Chapter 1. Television Overview
13