Front Control Panel - Brother HL-2600CN Owner's Manual

Front Control Panel

The shaded buttons on the front control panel are duplicated on the remote control. The top row of labels shows the
control functions when there are no TV menus displayed on the screen. The bottom row of labels shows the control
functions when the TV menus are displayed on the screen or when a special function has been activated. See
"Remote Control Overview" for further details on the functions of these buttons.
SYSTEM
RESET LAMP STATUS TIMER
SYSTEM
RESET
LAMP
A/V Reset
There may be times when you wish to reset the A/V (Audio and Video) settings back to the factory defaults. To
return all of the settings at once, press GUIDE and FORMAT on the front panel at the same time. To reset the
defaults for individual devices, use the A/V Memory Reset selection on the Audio/Video menu.
Front-Panel Indicator Lights
SYSTEM
RESET LAMP STATUS TIMER
Power/Timer Indicator
Indicator Color
None (indicator
off)
Green, steady
Green, rapid
blinking
Green, slow
blinking
12
Chapter 1. Television Overview
– VOL –
POWER
System Reset
If the TV does not respond to either the remote control or the front panel controls and/or
POWER
does not power Off, press the SYSTEM RESET button with a pointed item like the end
point of a paperclip. The TV will turn Off and the TIMER light will flash quickly for about
STATUS TIMER
one minute. When the TIMER light stops flashing, you may again turn on the TV. The
changes you made the last time the TV was on before you used the SYSTEM RESET
button may be lost; any changes that were previously saved are not lost, however.
POWER – VOL –
TV Condition
TV is powered OFF.
TV is powered ON.
1. TV just plugged into AC outlet.
2. AC just restored after power failure. Wait until blinking stops before turning on
3. TV Rebooting after System Reset
used.
4. TV Rebooting after power
fluctuation or receiving abnormal
digital signals from digital channel,
CableCARD™, or digital device.
5. You have begun the procedure to
update software from an authorized
flash memory device.
TV powered off and automatic-on
timer is set.
– CH – FORMAT
< >
ENTER
ADJUST
– VOL –
FORMAT
– CH –
< >
ADJUST
Additional Information
Normal operation.
Normal operation.
Wait until blinking stops before turning on
(approximately 1 minute). Normal operation.
(approximately 1 minute). Normal operation.
Wait until blinking stops before turning on
(approximately 1-2 minutes). Normal operation.
Wait until blinking stops before turning on
(approximately 1 minute). Normal operation.
For detailed information, see the instructions
that accompany the authorized software update.
Important: Do not use non-authorized software at
any time.
Normal operation. TV can be turned on at any
time.
MENU GUIDE
MENU
CANCEL
ADJUST
MENU GUIDE
ENTER
MENU CANCEL
DEVICE
– CH –
< >
DEVICE