Appendix B: Specifications - Brother HL-2600CN Owner's Manual

Appendix B: Specifications

From time to time, Mitsubishi may offer software updates to expand the features or operation of this TV. When
these updates are available they will be announced on our web site, Mitsubishi-tv.com. If you return your Owner's
registration card, with your model and serial number, you may receive written notification of available software
updates.
TV Specifications
Projection System
Lamp
Channel Frequency Reception
Channel Type
Note for Digital Channels: The channel numbers displayed on screen are determined by the broadcaster or cable
company and can vary from the standard frequency number. If there is no channel number information included from
the broadcaster or cable company, then the TV will create a channel number based on the frequency number as the
main channel number and the program number as the sub-channel number. When using an authorized CableCARD,
the channel numbers are determined by the cable company.
Inputs
Antenna/Cable input Qty. 2
HDMI (digital video/audio), Qty. 2
Signal Type
Video/S-Video, Qty. 3 each
Signal Type
Component Video (Y/Pr/Pb) Qty. 3 sets
Signal Type
Audio Inputs: Qty. 8 pairs
DLP, 0.83" chip, 1920 x 1080 pixels with Smooth Picture™
120 watt VIP type
Over-the-Air: VHF 2 - 13, UHF 1 - 69
Analog Cable: 1 - 125
Digital Cable: 1 - 135
Over the Air: Analog NTSC, Digital ATSC with sub-channels
(all 18 video formats)
Cable: Analog NTSC (non-scrambled)
Digital QAM 6 and 256 with sub-channels (non-
scrambled)
CableCARD™: Authorized scrambled and non-scrambled digital
channels
F connector, 75-ohm
HDMI standard connector
HDMI standards for digital audio and video.
HDMI 1: Not intended for use with personal computers.
HDMI 2: Accepts PC input.
VGA (60 x 80), 60Hz
W-VGA (88 x 80), 60 Hz
SVGA (800 x 600), 60Hz
W-SVGA (106 x 600), 60Hz
XGA (102 x 768), 60 Hz
1280 x 720, 60 Hz (EIA standards)
Video: RCA Pin Plug, 1.0 V p-p, 75 ohm
S-Video: Four Pin Din Plug
Y: 1.0 Vp-p 75 ohm
C: 0.286 Vp-p (burst signal), 75 ohm
NTSC 80i only
RCA Pin Plug (EIA-770.3 Standard Levels and Timing)
Y: 1.0 Vp-p (includes sync), 75 ohm
Pr: 700 mV p-p, 75 ohm
Pb: 700 mV p-p, 75 ohm
EIA-770.1 & EIA 770.2 80i, 80p, EIA 770.3 720p and 1080i
standards)
RCA Pin Plug 500 mV (full scale), 3 k ohm
(video
99
Appendices