Brother MFC-9460CDN User Manual page 185

Level 1 Level 2
7.Network 1.Wired LAN
(MFC-9560CDW) (Continued)
(Continued)
2.WLAN
See Network User's Guide.
The factory settings are shown in Bold with an asterisk.
148
Level 3 Level 4
—
2.Ethernet
—
3.Wired Status
4.MAC Address —
5.Set to Default —
—
6.Wired Enable
1.TCP/IP 1.Boot Method Auto*
2.IP Address [000-255]. [000-255].
3.Subnet Mask [000-255]. [000-255].
4.Gateway
5.Node Name
6.WINS Config Auto*
Options Descriptions
Chooses the
Auto*
Ethernet link mode.
100B-FD
100B-HD
10B-FD
10B-HD
You can see the
Active 100B-FD
current wired status.
Active 100B-HD
Active 10B-FD
Active 10B-HD
Inactive
Wired OFF
— Shows the MAC
address of the
machine.
Restore the wired
1.Reset
network setting to
2.Exit
factory default.
Enable or Disable the
On*
Wired LAN manually.
Off
Chooses the BOOT
method that best
Static
suits your needs.
RARP
BOOTP
DHCP
Enter the IP address.
[000-255]. [000-255]
Enter the Subnet
[000-255]. [000-255] mask.
[000-255]. [000-255]. Enter the Gateway
[000-255]. [000-255] address.
Enter the Node
BRWXXXXXXXXXXXX
name.
Chooses the WINS
configuration mode.
Static