Brother MFC-9460CDN User Manual page 182

Level 1 Level 2
7.Network 1.TCP/IP
(MFC-9460CDN)
See Network User's Guide.
The factory settings are shown in Bold with an asterisk.
Level 3 Level 4
1.Boot Method —
2.IP Address —
3.Subnet Mask —
—
4.Gateway
—
5.Node Name
6.WINS Config —
7.WINS Server —
8.DNS Server —
—
9.APIPA
—
0.IPv6
Menu and features
Options Descriptions
Chooses the BOOT
Auto*
method that best
Static
suits your needs.
RARP
BOOTP
DHCP
[000-255]. [000-255]. Enter the IP address.
[000-255]. [000-255]
[000-255]. [000-255]. Enter the Subnet
[000-255]. [000-255] mask.
[000-255]. [000-255]. Enter the Gateway
[000-255]. [000-255] address.
Enter the Node
BRNXXXXXXXXXXXX
name.
Chooses the WINS
Auto*
configuration mode.
Static
Specifies the IP
Primary
address of the
[000-255]. [000-255].
primary or secondary
[000-255]. [000-255]
WINS server.
Secondary
[000-255]. [000-255].
[000-255]. [000-255]
Specifies the IP
Primary
address of the
[000-255]. [000-255].
primary or secondary
[000-255]. [000-255]
DNS server.
Secondary
[000-255]. [000-255].
[000-255]. [000-255]
Automatically
On*
allocates the IP
Off
address from the
link-local address
range.
Enable or Disable the
On
IPv6 protocol. If you
Off*
want to use the IPv6
protocol, visit
http://solutions.brother.com/
for more information.
C
145