Brother MFC-9460CDN User Manual page 134

Error Message
Registration
Rename the File
Replace Parts
Belt Unit
Replace Parts
Drum
Replace Parts
Fuser Unit
Cause
Registration failed.
There is already a file on the USB
Flash memory drive with the
same name as the file you are
trying to save.
It is time to replace the belt unit.
It is time to replace the drum unit. Replace the drum unit.
The drum unit counter was not
reset when a new drum was
installed.
It is time to replace the fuser unit. Call Brother Customer Service or a Brother
Action
Press Black Start or Color Start and try
again.
Do one of the following:
 Turn off the machine's power switch.
Wait a few seconds, then turn it on
again.
 Try Manual Registration, Menu, 4, 8.
(See Manual Registration in Appendix A
of the Advanced User's Guide.)
 Put in a new belt unit. (See Replacing
the belt unit on page 79.)
 If the problem continues, call Brother
Customer Service.
Change the file name of the file on the USB
Flash memory drive or the file you are trying
to save.
Replace the belt unit. (See Replacing the
belt unit on page 79.)
(See Replacing the drum unit on page 73.)
Reset the drum unit counter.
(See Resetting the drum counter
on page 79.)
Authorized Service Center to replace the
fuser unit.
To replace Fuser Unit call Brother Customer
Service at:
1-877-BROTHER (1-877-276-8437) (in
USA)
1-877-BROTHER (in Canada)
or to locate a Brother Authorized Service
Center, visit us at:
http://www.brother-usa.com/service/
Troubleshooting
B
97