Volume Settings; Ring Volume; Beeper Volume; Speaker Volume - Brother MFC-9440CN User Manual

Volume settings

Ring volume

You can choose a ring volume level from a
range of settings, from High to Off.
While in Fax mode press
the volume level. The LCD shows the current
setting, and each key press will change the
volume to the next level. The machine will
keep the new setting until you change it.
You can also change the ring volume through
the menu:
a
Press Menu, 1, 4, 1.
Volume
1.Ring
b
Press a or b to choose Off, Low, Med
or High.
Press OK.
c
Press Stop/Exit.

Beeper volume

When the beeper is on, the machine will beep
when you press a key, make a mistake, or
after you send or receive a fax. You can
choose a range of volume levels, from High
to Off.
a
Press Menu, 1, 4, 2.
Volume
2.Beeper
b
Press a or b to choose Off, Low, Med
or High.
Press OK.
c
Press Stop/Exit.
3
3
or to adjust
3

Speaker volume

You can choose a range of speaker volume
levels, from High to Off.
You can adjust the speaker volume with the
control panel keys.
a
Press (Fax)
b
Press Hook.
c
Press or
This setting will stay until you change it
again.
d
Press Hook.
You can also change the speaker volume
through the menu:
a
Press Menu, 1, 4, 3.
Volume
3.Speaker
b
Press a or b to choose Off, Low, Med
or High.
Press OK.
c
Press Stop/Exit.
General setup
3
.
23
3