Loading Documents; Using The Adf (Automatic Document Feeder) - Brother MFC-9440CN User Manual

Chapter 2

Loading documents

You can send a fax, make copies, and scan
from the ADF (automatic document feeder)
and from the scanner glass.
Using the ADF (automatic
document feeder)
The ADF can hold up 35 pages and feeds
each sheet individually. Use standard 20 lb
2
(80 g/m ) paper and always fan the pages
before putting them in the ADF.
CAUTION
DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.
DO NOT use paper that is curled, wrinkled,
folded, ripped, stapled, paper-clipped,
pasted or taped.
DO NOT use cardboard, newspaper or
fabric.
Make sure documents written with ink are
completely dry.
Documents to be faxed must be from 5.8
to 8.5 inches (147.3 to 215.9 mm) wide
and from 5.8 to 14 inches (147.3 to 356
mm) long, and of a standard weight [20 lb
2
(80 g/m )].
18
a
Unfold the ADF document output
2 support flap (1).
2
b
Fan the pages well.
c
Place your document, face up top edge
first, in the ADF until you feel it touch the
feed roller. The LCD will show
ADF Ready.
d
Adjust the paper guides to fit the width of
your document.
CAUTION
To avoid damaging your machine while
using the ADF, DO NOT pull on the
document while it is feeding.
To scan non-standard documents see
Using the scanner glass on page 19.
1