Tray Selection - Brother MFC-9440CN User Manual

Chapter 12
2 in 1 (L)
4 in 1 (P)
4 in 1 (L)
If you are copying from the scanner
glass:
Insert your document face down in the
direction shown below:
2 in 1 (P)
2 in 1 (L)
4 in 1 (P)
4 in 1 (L)

Tray selection

You can change the tray use only for the next
copy.
a
Make sure you are in Copy mode
b
Load your document.
76
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Options.
Press a or b to choose Tray Select.
Press OK.
e
Press a or b to choose the tray usage.
Press OK.
f
Press Start.
Choose
Tray Select
12
* XXX is the paper size you set in Menu, 1, 3.
Note
• T2 or #2 appears only if the optional paper
tray is installed.
• To change the default setting for Tray
Select, see Tray use in copy mode
on page 21.
12
.
MP>T1 or M>T1>T2
T1>MP or T1>T2>M
#1(XXX)*
#2(XXX)*
MP(XXX)*