Replacing The Waste Toner Box - Brother MFC-9440CN User Manual

2
Push the drum unit in until it stops.
h
Close the front cover of the machine.
When you replace the belt unit with a
new one, you need to reset the belt unit
counter by completing the following
steps:
i
Press Menu, 8, 4.
Machine Info.
4.Reset Menu
Troubleshooting and routine maintenance
j
Press a or b to choose Belt Unit.
Press OK.
k
Press 1 to reset the belt unit counter.

Replacing the waste toner box

Order Number WT-100CL
Change waste toner soon message
After you have printed approximately 30,000
images at 5% coverage, you must change the
waste toner box. The actual number of
printed pages will vary depending on the print
jobs and paper you use.
Waste Toner Soon
Waste Toner Box Full message
When the waste toner box is full, the following
message appears on the LCD and the
machine will stop printing. When you see this
message, you must replace the toner box:
Waste Toner Full
WARNING
DO NOT reuse the waste toner box.
Replacing the waste toner box
WARNING
DO NOT put the waste toner box into a fire.
It could explode.
Be careful not to spill the toner. DO NOT
inhale or allow it to get into your eyes.
C
C
C
C
C
175