Mode Timer; Paper Settings; Paper Type - Brother MFC-790CW User Manual

Mode Timer

The machine has four temporary mode keys
on the control panel: Fax, Scan, Copy and
Photo Capture. You can change the amount
of time the machine takes after the last Scan,
Copy or PhotoCapture operation before it
returns to Fax mode. If you choose Off, the
machine stays in the mode you used last.
a
Press MENU.
b
Press a or b to display
General Setup.
c
Press General Setup.
d
Press a or b to display Mode Timer.
e
Press Mode Timer.
f
Press 0 Sec, 30 Secs, 1 Min,
2 Mins, 5 Mins or Off.
g
Press Stop/Exit.

Paper settings

3

Paper Type

To get the best print quality, set the machine
for the type of paper you are using.
a
Press MENU.
b
Press a or b to display
General Setup.
c
Press General Setup.
d
Press a or b to display Paper Type.
e
Press Paper Type.
f
Press Plain Paper, Inkjet Paper,
Brother BP71, Other Glossy or
Transparency.
g
Press Stop/Exit.
Note
The machine ejects paper with printed
surfaces face up onto the paper tray in
front of the machine. When you use
transparencies or glossy paper, remove
each sheet at once to prevent smudging
or paper jams.
General setup
3
3
3
25