Memory Receive (Black&White Only); Fax Forwarding - Brother MFC-790CW User Manual

Chapter 6
Memory Receive
(Black&White only)
You can only use one Memory Receive
operation at a time.

Fax Forwarding

Paging
Fax Storage
PC Fax Receive
Off
You can change your selection at any time. If
received faxes are still in the machine's
memory when you change the memory
receive operation, a LCD question will appear
on the LCD. (See Changing Memory Receive
Operations on page 54.)
Fax Forwarding
When you choose Fax Forwarding, your
machine stores the received fax in the
memory. The machine will then dial the fax
number you have programmed and forward
the fax message.
a
Press MENU.
b
Press a or b to display Fax.
c
Press Fax.
d
Press a or b to display
Setup Receive.
e
Press Setup Receive.
f
Press a or b to display
Memory Receive.
g
Press Memory Receive.
h
Press Fax Forward.
i
Enter the forwarding number (up to 20
digits) by using the buttons on the LCD.
Press OK.
50
j
Press Backup Print:On or
Backup Print:Off.
6
Note
• If you choose Backup Print:On, the
machine will also print the fax at your
machine so you will have a copy. This is
the safety feature in case there is a power
failure before the fax is forwarded or a
problem at the receiving machine. This
Backup Print:On feature will not work
if Fax Preview is on.
• The machine can store fax approximately
24 hours if there is a power failure.
• When you receive a color fax, your
machine prints the color fax at your
machine but does not send the fax to the
fax forwarding number you programmed.
k
Press Stop/Exit.
6