Scan To File - Brother MFC-250C Software User's Manual

Scan to File

When you choose Scan to File, you can scan a black and white or color document and send it directly to the
®
Macintosh you designate on your network. The file will be saved in the folder and file format that you have
configured in ControlCenter2 on the designated Macintosh
File on page 189.)
a
Load your document.
b
Press the (Scan) key.
c
Press a or b to choose Scan to File.
Press OK.
d
Press a or b to choose the destination Macintosh
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination
®
Macintosh on the control panel.
Press OK.
Note
For DCP models, press a or b repeatedly to enter the first digit of the PIN number. Press c to move the
cursor, then use a or b to enter the second digit. Repeat until you have entered all four digits of the PIN
number. Press OK.
e
Press Black Start or Color Start.
The machine starts the scanning process.
For Touchscreen models
a
Load your document.
b
Press the (Scan) key.
c
Press Scan to File.
d
Press a or b to display the destination Macintosh
e
Press the destination Macintosh
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination
®
Macintosh on the control panel.
Press OK.
f
Press Black Start or Color Start.
The machine starts the scanning process.
Network Scanning (For models with built-in network support)
®
. You can change the Scan configuration. (See
®
you want to send to.
®
you want to send to.
®
and then press OK.
12
12
12
208