Brother MFC-250C Software User's Manual page 215

Scan to OCR
When you choose Scan to OCR, your document will be scanned and sent directly to the Macintosh
designated on your network. The ControlCenter2 will launch the Presto!
document into text that can be viewed and edited from a word processing application on the designated
®
Macintosh .
a
Load your document.
b
Press the (Scan) key.
c
Press a or b to choose Scan to OCR.
Press OK.
d
Press a or b to choose the destination Macintosh
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination
®
Macintosh on the control panel.
Press OK.
Note
For DCP models, press a or b repeatedly to enter the first digit of the PIN number. Press c to move the
cursor, then use a or b to enter the second digit. Repeat until you have entered all four digits of the PIN
number. Press OK.
e
Press Black Start or Color Start.
The machine starts the scanning process.
For Touchscreen models
a
Load your document.
b
Press the (Scan) key.
c
Press Scan to OCR.
d
Press a or b to display the destination Macintosh
e
Press the destination Macintosh
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination
®
Macintosh on the control panel.
Press OK.
f
Press Black Start or Color Start.
The machine starts the scanning process.
Note
®
• Presto! PageManager
• You can't choose color Scan type for this function. Black Start or Color Start do not change the settings.
®
and then press OK.
®
must be installed on your Macintosh
Network Scanning (For models with built-in network support)
®
PageManager
®
you want to send to.
®
you want to send to.
®
.
12
®
you
®
and convert your
12
12
207