Brother MFC-250C Software User's Manual page 225

Factory reset
You can reset Quality, File Type, Glass ScanSize and File Name to the factory settings.
a
Press the (Scan) key.
b
Press a or b to choose Scan to FTP.
Press OK.
c
Press a or b to choose Manual.
Press OK.
Note
If there is no FTP Profile configured, skip c and go to d.
d
Enter the FTP host address (for example ftp.example.com up to 60 characters) or the IP address (for
example 192.23.56.189).
Press OK.
e
Enter the destination folder (for example /brother/abc/, up to 60 characters).
Press OK.
f
Enter Username. Press OK.
g
Enter Password. Press OK.
h
Press a or b to choose Factory Reset.
Press OK.
i
Press 1 to choose Yes.
j
Press Stop/Exit.
Network Scanning (For models with built-in network support)
12
12
217