Simultaneous Printing, Scanning And Faxing; Clearing Data From The Memory; Macintosh - Brother MFC-250C Software User's Manual

Brother mfc-250c: software guide
Hide thumbs Also See for MFC-250C:
Table of Contents

Advertisement

9
Printing and Faxing
Setting up your USB-equipped Apple
Note
• The screens shown in this section are from Mac OS
vary depending on your operating system and application.
• Before you can connect the machine to your Macintosh
6 feet (2 meters).
Improper Setup
DO NOT connect the machine to a USB port on a keyboard or a non-powered USB hub.
Choosing the right type of paper
For high quality printing, it is important to choose the right type of paper. Be sure to read About paper in the
User's Guide before buying paper.

Simultaneous printing, scanning and faxing

Your machine can print from your Macintosh
a document into the Macintosh
However, when the machine is copying or receiving a fax on paper, it pauses the Macintosh
operation, and then continues printing when copying or fax receiving has finished.

Clearing data from the memory

If the LCD shows Data Remaining, you can clear the data that is left in the printer memory by pressing
Stop/Exit key on the control panel.
®
while sending or receiving a fax in memory, or while scanning
®
Fax sending will not be stopped during Macintosh
®

Macintosh

®
X 10.5. Screens on your Macintosh
®
, you must buy a USB cable that is no longer than
®
®
may
®
printing.
®
printing
144
9
9
9
9
9
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-290cMfc-5890cnMfc-6490cwDcp series

Table of Contents