Before Using The Brother Software; Xp Sp2 Users; Firewall Settings (For Network Users); For Windows - Brother MFC-250C Software User's Manual

Brother mfc-250c: software guide
Hide thumbs Also See for MFC-250C:
Table of Contents

Advertisement

8

Firewall settings (For Network users)

Before using the Brother software

Firewall settings on your PC may reject the necessary network connection for network printing, network
scanning and PC Fax. If you are using Windows
CD-ROM, the necessary Firewall settings have already been made. If you did not install from the CD-ROM
follow the instructions below to configure Windows
software, see the User's Guide for your software or contact the software manufacturer.
UDP Port number information for Firewall configuration
UDP Port
Network Scanning
External Port number
Internal Port number
1
Add Port number 137 if you still have trouble with your network connection after you added port 54925 and 54926. Port number 137 also supports
printing, PhotoCapture Center
®

For Windows

XP SP2 users

a
Click the Start button, Control Panel, Network and Internet Connections and then Windows Firewall.
Make sure that Windows Firewall on the General tab is set to On.
b
Click the Advanced tab and Settings... button.
c
Click the Add button.
d
Add port 54925 for network scanning by entering the information below:
1 In Description of service: Enter any description, for example "Brother Scanner".
2 In Name or IP address (for example 192.168.0.12) of the computer hosting this service on your
network: Enter "Localhost".
®
Network PC-Fax
54925
54925
®
and Remote Setup over the network.
Firewall and you installed MFL-Pro Suite from the
®
Firewall. If you are using any other personal firewall
Network Scanning and
Network PC-Fax
54926
54926
1
137
137
8
8
8
8
139

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-290cMfc-5890cnMfc-6490cwDcp series

Table of Contents