4004R Fire Alarm installation, programming, and operating instructions
Figure 3: Manual releasing sequence timeline
3.3
Specifications
3.3.1
Major panel components
Figure 4
shows the major components of the 4004R. As shown in the figure, terminals for RACs, NACs, IDCs, and SPMs are located along
the top of the panel. If Class A adapters are used, install tehm beneath these terminals. Refer to
Connecting the field wiring and AC power
for specific information on wiring the 4004R.
page 9
579-354
Rev. X
Need help?
Do you have a question about the 4004R and is the answer not in the manual?