Record Your Name For All Screening; Announcements; Reset All Your Screening; Voice Guide To Set Smart Call - VTech IS8128-11 User Manual

Record your name for all screening

announcements

1. Press CALL BLOCK on the handset or
telephone base to enter the call block
menu when the telephone is not in
use.
- OR -
Press MENU/SELECT to enter the
main menu when the handset is
not in use. Then, press q CID or
p to scroll to Smart call blk. Press
MENU/SELECT.
2. Press q CID or p to scroll
to Screening annc, then
MENU/SELECT.
3. Press MENU/SELECT to select Rec
your name. The system announces,
"Record after the tone. Press 5 when
you are done."
4. Speak towards the handset to record
your name. Press 5 to end recording.
To listen to the announcement with your
recorded name again, scroll to Play annc
and press MENU/SELECT.
Reset all your screening announcements
1. Press CALL BLOCK on the handset or
telephone base to enter the call block
menu when the telephone is not in
use.
- OR -
Press MENU/SELECT to enter the
main menu when the handset is
not in use. Then, press q CID or
p to scroll to Smart call blk. Press
MENU/SELECT.
2. Press q CID or p
to Screening annc,
press
MENU/SELECT.
3. Press q CID or p to scroll to Reset
annc, then press MENU/SELECT.
The screen shows Reset annc?. Press
MENU/SELECT again to confirm. The
screen shows Annc reset. before
returning to the previous menu.
Your name will be deleted from all the
screening announcements, and the
telephone will use the default screening
announcements.
84

Voice guide to set Smart call

blocker

This feature is an easy and alternative way
for you to do the basic setup of Smart
call blocker. You can follow the voice
guide to set your telephone system to
allow or to screen all incoming home
calls, or to screen home calls that do not
display a phone number.
1. Press CALL BLOCK on the handset
or telephone base to enter the call
to scroll
block menu when the telephone is
then press
not in use.
- OR -
Press MENU/SELECT to enter the
main menu when the handset is
not in use. Then, press q CID or
p to scroll to Smart call blk. Press
MENU/SELECT.
2. Press q CID or p
to Voice
MENU/SELECT.
3. You hear a voice prompt
voice guide will assist you with the
basic setup of Smart call
4. Set up your Smart call blocker
feature by inputting the designated
numbers, as instructed in the voice
guide.
• Press 1 if you want to screen home
calls with telephone numbers that
are not saved in your phonebook,
allow list or star name list; or
• Press 2 if you do not want to
screen calls, and want to allow all
incoming calls to get through.
NOTES
• The screening feature of Smart call
blocker is applicable to home calls
only. All incoming cell calls will get
through and ring. If you want to
block a cell call, add the number to
the block list. See
• You can press CANCEL on the
telephone base to quit the voice
guide at any time.
• After a power outage, the telephone
base prompts you to set the date and
time. After the date and time setting
is done or skipped, the telephone
base will prompt if you want to
set up Smart call blocker via voice
guide. Press MENU/SELECT to start
the setup.
to scroll
guide, then press
"Hello! This
blocker..."
85
Block list.