Related Manuals for motogadget motoscope tiny
Summary of Contents for motogadget motoscope tiny
- Page 1 Operating and installation guide for the digital instrument motoscope tiny motoscope tiny speedster motoscope tiny vintage KBA 91260 ______________________________________________________________________ Version 2.8...
- Page 2 Please read the following information and recommendations thoroughly and follow these instructions during installation and use of the instrument. No liability is assumed by motogadget for damage or defects resulting from negligence or failure to follow the operating and installation guide.
-
Page 3: Exclusion Of Liability
2.1 Duty of registration The motoscope tiny / speedster / vintage has a General Operating Permit (ABE) and therefore does not have to be entered into the vehicle documents. The device is identifiable as having a General Operating Permit by a special label with the code "KBA 91260"... -
Page 4: Quick Start
4.2 Required materials for installing and connecting the instrument Since the motoscope tiny is suitable for a variety of vehicles, additional materials might be necessary in order to mount the instrument to an individual vehicle. Such materials can include: ... -
Page 5: Installation Of The Instrument
(see connection in appendix) 8.2 Battery and voltage supply The motoscope tiny require supply voltage from 9V to 15V. Operating the instrument without a vehicle battery is not possible. Please ensure that the polarity of the voltage supply is correct. - Page 6 8.5 Installation and connection of the speedometer sensor 8.5.1 Use of the vehicles OEM speedometer sensor If your vehicle comes with a three wire OEM speedometer you may use the sensor with the motoscope tiny. Please advice our technical database if your sensor is compatible.
- Page 7 12.2 Menu 2 – Odometer setup (SET ODO) If you like to take the vehicles milage form the old speedometer to the motoscope tiny you can setup this value. A short push button operation (one indicator light is illuminated) increases the chosen digit. . A long push button operation (two indicator lights are illuminated) change between the digits.
-
Page 8: Safety Instructions
13 Safety instructions The motoscope tiny provide a lot of information at one time. Users consequently require a certain "training" period in order to recognise all the given information quickly and correctly. Please do not distract yourself by watching the instrument in public traffic. -
Page 9: Connection Scheme
Before returning your motoscope for technical inspection, please contact our technical support. For returning a item, visit our website and follow the instructions for a service request. motogadget wishes you pleasant and safe riding and lots of fun with your new motoscope tiny. - Page 10 15.3 General overview of operation Normal Operation Setup Menue minute count up Set hour hour hour count up Set Odo digit count up delete trip digit count up delete top speed digit count up Set Pulse batt digit count up Set Circ digit count up...
- Page 11 15.4 Table of tire circumferences front wheel tire sizes and circumference settings 16´´ tire inner diameter tire size circumference (mm) tire size circumference (mm) 100/90‐16 1770 130/70‐16 1776 110/90‐16 1824 130/90‐16 1933 120/80‐16 1806 150/80‐16 1951 120/90‐16 1878 17´´ tire inner diameter tire size circumference (mm) tire size circumference (mm) 100/80‐17 1788 120/70‐17 1812 110/70‐17 1770 120/80‐17 ...
Need help?
Do you have a question about the motoscope tiny and is the answer not in the manual?
Questions and answers