iRobot Roomba Vac 2 Essential Owner's Manual page 14

Cleaning the filter
1
Remove the bin. Open bin door and remove filter.
2
Remove debris with cleaning brush.
3
Reinsert filter and place bin back in the robot.
NOTE: The filter can be rinsed with
water. Make sure it is completely dry
before reinstalling. Frequent rinses are
not recommended.
Cleaning the charging contacts and sensors
Wipe charging contacts and sensors with a clean, dry cloth.
CHARGING CONTACTS
IMPORTANT:
solution or water onto the sensors or
sensor openings.
Roomba® Vac 2 Essential robot + AutoEmpty™ dock Owner's Guide
SENSORS
Do not spray cleaning
13
EN