Deleting An Rs - Avaya P330 User Manual

Chapter 6

Deleting an RS

There are two ways to delete an RS. You can delete an RS's connection
to an RSG, or you can completely delete the RS so that it is no longer
available for configuration. If you completely delete the RS, it no longer
appears in any RSG.
To delete an RS's connection to an RSG:
To completely delete an RS so that it is no longer available for
configuration:
* Note: If an RS is connected to an RSG, completely deleting the RS
69
1. In the Logical View, select an RSG from the RSG Area, and then
select the RS you want to delete from the RS Area.
Or
From the Physical Tree Area, select an RSG, and then select the
RS you want to delete.
2. Click .
Delete
Or
Select
Edit > Delete
1. From the Physical Tree Area, select RSs, and select the RS you
want to delete.
2. Click Delete .
Or
Select
Edit > Delete
also deletes the RS from any RSG to which it was connected.
. The RS is deleted from the selected RSG.
. The RS is deleted.
Avaya P330 Load Balancing Manager User Guide