Real Server Properties Sheet - Avaya P330 User Manual

Chapter 6

Real Server Properties Sheet

The following table lists the fields in the RS Properties Sheet and their
descriptions.
Field
IP address
Admin Status
Oper Status
Weight
Success Retries
Failed Retries
Interval
Timeout
Backup IP
address
Backup Status
71
Table 6-2. Real Server Properties Sheet
Description
The IP address of the Real Server.
The user-defined status of the server. Available
options are:
• Enable
• Disable
The operational status of the server. This field is read
only. Possible values are:
• Up - the paths are operational
• Down - all paths through the firewall are not
operational, or no paths are configured.
The relative weight of the server used for weighted
load balancing metrics.
The number of successful health checks necessary to
determine that the server is operational.
The number of unsuccessful health checks necessary
to determine that the server is not operational.
The health check interval in seconds. The allowed
range is 1-3600.
The amount of time in seconds before the health
check times out. The allowed range is 1-3600.
The IP address of the backup server.
The status of the backup Real Server. Possible values
are:
• Not Configured - No backup Real Server is
configured.
• Standby - The backup server is ready to
operate if necessary.
• Down - The backup server is not operational.
The Real Server may or may not be operational.
• Active - The backup server is currently active
because the Real Server is not operational.
Avaya P330 Load Balancing Manager User Guide