Table of Contents
Advertisement
Lower Strap
Retention Tab
Lower Strap
Retention Tab
Lower Strap
Retention Tab
Figure 3-1. Re-installing the Neck Pad
3. Repeat steps 1 and 2 for the other side of the headband and neck
pad if necessary.
C. Lacing the Sliding Bar Buckles. While donning and adjust-
ing the head mount, it is possible for a strap to slip out of a slide
fastener. Perform the following procedure to replace the strap and
sliding bar buckle.
1. Thread the strap from the inside of the buckle over the move-
able sliding bar (see Figure 3-2). Thread the strap back through the
buckle but this time under the sliding bar and over the serrated part
of the buckle.
2. Pull the strap through the buckle and tighten as necessary.
3. Repeat steps 1 and 2 for any other straps and buckles that may
have come undone.
Moveable
Fixed
Sliding Bar
Serrated Bar
Figure 3-2. Lacing the Sliding Bar Buckles
3-7
Advertisement
Table of Contents
