ATN PVS7-HPT User Manual page 50

Atn pvs7-hpt: user guide
Hide thumbs Also See for PVS7-HPT:
Table of Contents

Advertisement

North (0°) to South (360°) reading. If the compass is inadvertently
magnetized this could cause an additional 15° error.
5. The tick mark closest to the center of the lighted display is the
compass bearing. The tick marks are in degrees, with longer marks
every five degrees and bearing labels every 10 degrees.
E. use of the 3X or 5X Magnifier Lens Assembly. The 3X or 5X
magnifier lens assembly can be threaded directly into the 1X objec-
tive lens, with the light interference filter (LIF) and sacrificial window
removed. It can also be threaded into the focus ring adapter and
slipped on over the end of the objective lens with the LIF installed.
NOTE
The Neck cord can be used to tether the magnifier to your person to
prevent losing the lens if it is dropped. To use the Neck cord, tie the
end without the clip tightly around the magnifier and attach the clip
to a buttonhole, belt loop or other convenient point.
Figure 2-13. PVS-7 with Magnifier Lens Assembly Installed
F. Infrared (IR) Operations
WARNING
THE IR ILLUMINATOR IS A LIGHT THAT IS INVISIBLE TO THE
UNAIDED EYE FOR USE DURING CONDITIONS OF EXTREME
DARKNESS. HOWEVER, THE LIGHT FROM THE ILLUMINATOR
CAN BE DETECTED BY THE ENEMY USING NIGHT VISION
DEVICES.
2-28

Advertisement

Table of Contents
loading

Table of Contents