Assembly Instructions - Kenmore SPOTLITE GO KW1050 Use & Care Manual

Please pay special attention to these hazard alert boxes,
and follow any instructions given. WARNING statements
alert you to such hazards as fire, electric shock, burns and
personal injury. CAUTION statements alert you to such
hazards as personal injury and/or property damage.
Before assembling the spot cleaner, check the PACKING LIST (page
2). Use this list to verify that you have received all the components of
your new Kenmore Spot Cleaner.
1. Align the hose storage clip with
the slot as shown. Slide down
the hose storage clip until it is
secured into place.
2. Align the tool storage clip with
the slot as shown. Slide down
the tool storage clip until it is
secured into place.

ASSEMBLY INSTRUCTIONS

3. Slide the tough stain tool onto
the end of the suction hose
until it clicks into place.
To remove: Press the tool release
button and pull away the tough
stain tool.
NOTE:
Put the flexible hose
onto the hose storage clip. Snap
the end of the hose with the tool
installed into the tool storage clip
when not in use.
- 8 -