Kenmore SPOTLITE GO KW1050 Use & Care Manual page 13

8. To lift away the stain, apply
downward pressure on the
front of the cleaning tool and
pull the tool backward slowly
to vacuum up excess dirty
liquids. Repeat as necessary.
EMPTYING THE DIRTY WATER TANK
WARNING
Always unplug power cord
from electrical outlet before
performing any service on spot
cleaner.
Empty the dirty water tank
when the dirty liquid reaches the
"Max Fill" line and there is a loss
in suction. During normal use,
debris may accumulate in the
dirty water tank. In order to keep
the spot cleaner functioning
properly, rinse out the dirty water
tank with clean water after each
use.
1. Lift up the dirty water tank
from the side of the unit. A
security latch is positioned to
keep the dirty water tank in
position to avoid unintentional
USING THE SPOT CLEANER
9. Empty the dirty water tank
when the dirty liquid reaches
the "Max Fill" line and there is a
loss in suction. See instructions
in the EMPTYING THE DIRTY
WATER TANK (page 13-14).
10.Once you have completed
cleaning, press the power
button; and unplug the power
cord plug from the outlet.
11. Turn the power cord hooks to
the proper position and wrap
the cord loosely around the
power cord hooks.
release. The latch will
automatically release when the
tank is pulled upwards.
- 13 -
Security
Latch