Kenmore SPOTLITE GO KW1050 Use & Care Manual page 10

FILLING THE CLEAN WATER TANK
2. Remove the clean water tank
cover by undoing the clean
water tank cover release.
3. Fill the tank with clean water
and cleaning formula. Ensure
the correct proportion of water
and cleaning solution is used
by referring to the solution
label.
SMALL CLEANING AREA -
0.8L/0.2G Liquid
LARGE CLEANING AREA –
1.6L/0.4G Liquid
6 /0.4G
/0.3G
/0.2G
CAUTION
Do not fill with water above
104°F (40°C).
Do not exceed filling the clean
water tank over the maximum fill
line indicated on the clean water
tank.
NOTE:
An 8 oz. (236ml) bottle
of cleaning formula is provided
with this spot cleaner. Ensure
the cleaning formula and water
are mixed correctly. Water must
be at room temperature. We
recommend only using Kenmore
carpet cleaning formula. Using
other solutions may cause excess
foaming and may invalidate your
warranty.
NOTE:
Using more than
the recommended amount of
cleaning formula may cause
excessive foaming. KEEP OUT
OF REACH OF CHILDREN. In
case of eye contact, thoroughly
flush with cold water. If irritation
persists, consult a physician.
4. Insert the locking tabs into the
slots of the clean water tank
first and then secure the clean
water tank cover back into
place until a click is heard.
- 10 -